50cm Tethered EV Charger Canopy, All Weather protection and effective Sun Shade

PROTECT YOUR INVESTMENT from the worst of the Winter weather or the hot SUMMER sun!! Our BUNDLED Weather Sun Shade Canopy together with a pair of heavy duty Side Extender Skirts fully shades your Charger from the sun ensuring no charge rate reduction due to temperature extremes.

NOTE: This Cover is designed for an TETHERED cable charger option and is Extra Wide to allow the cable to be wound around the charger and still stay protected by the extending side skirts. An added safety feature is the exaggerated safe edge to protect your face when in use. 

ORDER DIRECT from the designers/manufacturers, ensuring top quality professional products. See attached article on effect of sun on charging: https://blog.chargemap.com/electric-vehicle-in-hot-weather-the-impact-on-charging/

Installation is easy with 4 screws for the canopy and 2 screws for each side skirt. A template is provided to mark hole positions in relation to the canopy. (Screws provided). We supply 2 loose connection strips to keep alignment between the canopy and the side skirts. (colour coded same as the secondary colour chosen) The canopy is very thick for strength. These items are individually manufactured by 3d Printing Process, made to order in a selection of 3 colours. The outer 'safe' edge is highlighted in a contrasting colour, if required.

IMPORTANT NOTE FOR ORDERING: The 'Primary' colour is the main colour with the 'Secondary' colour being used for the outer edge, as shown in pictures. If you want same colour use both selections with same colour....thanks ! The material used is a PETG polymer which resists colour fade due to UV light and is fully frost resistant. The overall width of each bundled assembly is 50cm. Weight of the 3 items is approx 1.4 kg. Canopy and Skirt makes a 43cm deep shade.

PLEASE NOTE. This item shape/size will be acceptable for MOST charger units, particularly Zappi, Rolec & Wallbox however if you feel you require a larger unit please message me for a quote. Any width can be accommodated due to a modular construction of curved ends and central extension. If your property has a weatherboard siding we can supply a stepped adapter to allow a neat install, at an extra cost.

We are sure this item will complete your charger installation in a useful and professional manner. Please keep in mind: you may see minor variation in otherwise identical pieces, their appearance is a result of the 3D printing process used to make them, and the tiny differences may be changes in texture or surface pattern, particularly on the back or bottom of a part. "Layer lines" will always be visible, but we do our best to minimise the irregularity in these patterns!