50cm EV Charger Canopy – 3D Printed Weather Protection Cover

PROTECT YOUR INVESTMENT from the worst of the Winter weather or the hot SUMMER sun !! This heavy duty Extra Wide Electric Vehicle Charger Cover has been specifically designed to fix above your previously installed wall charger point to protect against the elements. An added safety feature is the exaggerated safe edge to protect your face when in use. Primarily designed as a rain shield it doubles up as a sunshade for your charger, ensuring no charge rate reduction due to temperature extremes.

 We ALSO offer a listing for a BUNDLED OFFER with the addition of SIDE EXTENDER SKIRTS for use with this canopy which FULLY shades the charger on 3 sides for maximum efficiency.....find this offer in this same shop (described as TETHERED Canopy) ORDER DIRECT from the designers/manufacturers, ensuring top quality professional products. Installation is easy with 4 screws, a template is provided to mark hole positions (Screws provided). The cover is very thick for strength and is individually manufactured by 3d Printing Process, made to order in a selection of 3 colours. The outer 'safe' edge is highlighted in a contrasting colour, if preferred.

IMPORTANT NOTE FOR ORDERING: The 'Primary' colour is the main colour with the 'Secondary' colour being used for the outer edge, as shown in pictures. If you want same colour use both selections with same colour....thanks ! The cover material used is a PETG polymer which resists colour fade from UV light and is fully frost resistant. The overall width of the cover is 50cm with a weight of 625g. If your property has a weatherboard siding we can supply a stepped adapter to allow a neat install, at an extra cost. PLEASE NOTE. This item shape/size will be acceptable for all charger units, particularly Zappi, Wallbox, Pod Point, Juice Box, Tesla etc. We are sure this item will complete your charger installation in a useful and professional manner. Please keep in mind: you may see minor variation in otherwise identical pieces, their appearance is a result of the 3D printing process used to make them, and the tiny differences may be changes in texture or surface pattern, particularly on the back or bottom of a part. "Layer lines" will always be visible, but we do our best to minimise the irregularity in these patterns!